MAC TOOLS MW165 Specifications download pdf (Page 28)

MicroCut 600

#MC25600

List $1449.00 |

List $3150.00 |

Sale $1089.00

Don’t let the small size fool you – the MicroCut 600 is a real

workhorse. It’s 40 amps of power allows you to cut ¼” steel at

over 20 in/min., ” at over 10 in/min. and ½” at 5 in/min! But

it’s small size (15” L x 6” W x 12 ½” H) and light weight (22 lbs)

means you can take this powerhouse anywhere, and inverter

technology means it’s energy efficient – the MicroCut 600 only

needs 30 amps of 220 volt power!

Infinite amperage adjustment lets you keep the raw cutting

power of the MicroCut 600 under control. Dial the current down

to 10 amps to perform precise cuts on thin gauge sheet metal.

Crank the power up to 40 amps for serious frame fabrication

and bracket building. Whatever project you need to tackle, the

MicroCut 600 is up to the task! And whether it’s steel, stainless

steel, aluminum, or any other metal that conducts electricity, the

MicroCut 600 will cut through it like a hot knife through butter.

The 13 ft plasma torch features our new “shoulder contact”

electrode and cutting tip for longer consumable life. This tip

design means the MicroCut 600 starts the arc instantly without

high frequency, so you can start your arc right through rusty and

painted metal, while reducing the possibility of damaging an on board

computer or any other sensitive electrical equipment you might be

cutting near.

And like all HTP equipment, we back the MicroCut 600 with our 90-day,

money-back guarantee – try the machine in your shop for 90 days, if

you don’t like the way it cuts, we will take it back, no questions asked.

And we further back the machine with a one-year warranty and free

shipping anywhere in the Continental United States.

When you compare the MicroCut 600 to the others, you will see

there is no comparison.

MicroCut 875S

#25875S

If you are doing serious fabricating in steel, aluminum, or

stainless steel, then you need power and lots of it. Whether

it’s an important, large project or a day-in, day-out production

process, the MicroCut 875S with its 55 amps of raw cutting

power, is up to the task!

Our customers have found plenty of uses for the MicroCut

875S. Some common ones are implement repairs and modifica-

tions, custom aluminum truck beds, and heavy marine

fabrication. These users tell us they prefer the MicroCut 875S

because it has the power – and the duty cycle (100% @ 45

amps) – for heavy cutting all day long. If you need to turn a

dumpster into metal corn flakes, then this is the tool for you.

The technology behind the MicroCut 875S is based on the

MicroCut 625’s inverter technology, proven in the field since

1998. But we put the machine on a diet – increasing the power

by 37% but keeping the weight the same, making it easy to take

this cutter right to the job. And a 20 ft cutting torch will allow

you to get up on top of equipment if that’s where the cutting

needs to take place.

A machine like the MicroCut 875S lets you redefine production

and fabrication techniques. The possibilities are truly staggering!

Just feed it 220 volts of power and clean compressed air, and it

will easily blast through ¾" solid steel plate at 7 ½"/min and

severance cut 1 " steel. The arc is ignited without high

frequency, extending consumable life while at the same time

eliminating any interference with computers, TVs or

telephones. And it features automatic arc re-ignition for

cutting expanded metal.

For all its power, the MicroCut 875S is easy to master; its

infinitely adjustable power is easily tamed for even delicate

tasks on mild, stainless or high carbon steel, aluminum, brass,

copper, galvanized, and rusty or painted plate. The MicroCut

875S has a full two-year warranty, our 90-day money-back

guarantee, and free shipping anywhere in the Continental

United States (Additional charges will apply for Hawaii, Alaska,

Puerto Rico and international locations.).

Do you need a MicroCut 875S? If your work involves metal and

you can visualize the need for this tool, the answer is probably

“yes”. The MicroCut 875S . . . it could change the way you

think about metal.

Plasma Cutters & Plasma Cutting Accessories

Sale $1870.00

800-USA-WELD | www.USAWeld.com

Plasma

Accessories

Plasma Cutters & Plasma Cutting Accessories

HTP Max Dry #25310-2 List $499.00 | Sale $360.00

Our Max Dry is the ultimate in an Air Dryer/Regulator.

Perfect workstation dryer for the serious home shop or body

shop. Forget those dryers that claim to get 99% of the water out

of the air; the problem is, as the air cools off down line in your

air hose, the humidity in the air condenses and turns into

moisture, creating headaches for you. The Max Dry eliminates

the problem. Here's how...

The Max Dry is a five stage filtration process all in one - the first

stage is a self draining 5 micron filter - this filters out all liquid

water, liquid oil, dust dirt, rust and pipe scale down to 40

microns.

The second stage is a Coalescing Filter which functions

differently from standard particulate filters. Air flows from inside

to outside through a coalescing media. Small aerosols come in

contact with the fibers in the media. These aerosols unite with

other aerosols caught in the fibers. The aerosols continue to

unite and emerge as a droplet on the outside of the media. The

weight of the droplet allows gravity to drain it away. This system

filters all oil mist, water mist, and submicronic particles down to

.03 microns!

The third stage is what separates this dryer from all the rest! Air

enters this stage and passes through a 70 micron filter. This

filter evenly disperses the air through the 2 quart desiccant bed.

The desiccant removes the humidity from the air to a tempera-

ture of -3° F. This eliminates the possibility of any moisture

condensing in your air lines and being pumped through your

plasma cutter, sander, air ratchet, grinder, or spray gun.

Best of all, the desiccant is reusable. When the desiccant is dry

and ready to absorb moisture, it is a dark blue in color. After the

desiccant has absorbed all the water vapor it can hold, it turns

an orangish clear color. Simply pour the desiccant into a baking

pan, pop it in the oven at 325°, and bake for approximately one

hour. It will turn back to blue and be ready to use again.

Stage 4 and 5 are a final filtration and precise regulator. The

regulator will accurately control the secondary pressure between

2 and 125 psi. The self-bleed venting feature permits use on

dead-end applications.

The Max Dry will eliminate your moisture problem - aren't

your air tools and paint projects worth it?

HTP Super Dry #25300 List $10.99 | Sale $8.99

We’ve looked a long time for a high quality air dryer that

would solve moisture problems for plasma cutters. One that

would be affordable – and we finally found one! I’ve used

this dryer on all kinds of applications – painting, sanding, air

tools, and of course plasma cutting, and found that it works

great! The secret is the desiccant, which actually absorbs the

humidity from the air, guaranteeing that no moisture gets past

it. Additionally, a sintered bronze element removes all dust

and dirt particles down to 5 microns! Best of all, the filter

changes from a dark blue color (new), to clear when the

desiccant absorbs all the moisture it can. It’s easy to tell when

to replace the filter.

When you look at the money you have invested in air tools,

plasma consumables, or even a gallon of automotive paint,

the HTP Super Dry acts as an inexpensive insurance policy.

Free Shipping - All Orders Over $35

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

Comments to this Manuals

No comments

MAC TOOLS MW165 Specifications Page 28

Comments to this Manuals

Related products and manuals for Welding System MAC TOOLS MW165